Please consult your local dealer for ALL other applications. Engine warranties are limited to manufacturing defects in the Engine Block, Cylinder Head(s), Head Gasket(s), Crankshaft, Pistons, Rods, Bearings, Oil Pump, Camshaft(s), Valves & Lifters. What is NOT Covered or Guaranteed to be included: . The engine you receive may or may NOT include some additional accessories and extra parts. To aid in installation, you get to keep your current engine and all attached accessories.
- Determine why the original engine failure occurred and make appropriate repairs. - Insure this engine is the same application as the one being replaced. - Clear all computer diagnostic codes from the vehicle prior to installing.
- Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets). - On crankshaft bolts that are drilled through sealant must be applied to avoid leaks. - Replace the timing belt. - Remove all'cap-plugs' orifice covers. - Install replacement sparkplugs & wires.
- Disable fuel/ignition before attempting to start engine. - Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze.
- Drain excess oil and coolant from exhaust system. - If equipped with an engine oil cooler the radiator or external cooler must be replaced.- Insure the cooling system is flushed and functioning properly. We will need your vehicle's year, make, model, engine size, transmission type, body type and VIN#.